From Brackish Cave Water to Drinking Water
How a brackish water reverse osmosis system converted 1,300 TDS water into a consistent supply of drinking and bottling water
A resort in Zanzibar needed a sustainable source of high-quality water for guest drinking supply and for its on-site bottling operation. The resort already had access to natural cave water, but it was brackish, with TDS (total dissolved solids) of about 1,300 mg/L. Alantech supplied a 10 m³/hr brackish water RO plant that turned this source into drinking and bottling water, achieving 70% recovery.
Brackish Water Treatment Challenge
The resort drew raw water from a cave that served as one of the natural water sources in the area. Water was available, but it was not suitable for use. At around 1,300 mg/L, TDS in brackish water like this makes it unsuitable for drinking and for bottling without treatment.
In hospitality, water quality matters twice over. Guests expect safe, good-tasting drinking water, and any water used in a bottling process must meet the same standard. The resort did not need to find a new source. It needed to make better use of the one it had.
Also Read: TDS (Total Dissolved Solids): Understanding Their Impact & How to Reduce Them
The treatment system had to:
- Treat the 1,300 TDS brackish water
- Deliver consistently good-quality treated water
- Supply water for drinking
- Supply water for bottling
- Stay cost-effective through high water recovery
10 m³/hr Brackish Water RO Plant Solution
A purpose-designed RO plant for resort water treatment
Alantech designed and installed a 10 m³/hr RO plant built specifically for this brackish water application. The plant works in two stages:
- Pre-treatment. Before water reaches the membranes, pre-treatment removes impurities that could otherwise foul the RO system. It is an essential first step in any brackish water treatment plant.
- Reverse osmosis. The prepared water is then pushed under pressure through RO membranes. This membrane separation removes salts and other dissolved solids, leaving much higher-quality water that is suitable for drinking and bottling.
Process flow: Cave water → pre-filtration → Reverse Osmosis → Product water → Drinking and bottling
The same membrane separation principle underpins desalination and seawater-to-drinking-water systems. Brackish water has a lower salt content than seawater, so a well-designed brackish water RO plant can treat it efficiently and recover more of the feed as usable water.
70% Water Recovery Results
The plant achieved about 70% recovery. Roughly 70% of the feed water entering the system becomes treated product water, and the remainder leaves as reject water.
A high recovery RO system matters for projects like this because:
- More usable water from the same source. The resort gets more product water from its existing cave supply.
- Less water wasted. Lower reject volumes make better use of a limited natural source.
- Better cost-effectiveness. Higher recovery improves the value of every cubic metre of feed water.
The result is a reliable supply of treated water for guests and for the resort’s bottling activities, built on the water source it already had.
Facing a High-TDS or Brackish Water Challenge?
High TDS, brackish water or limited freshwater does not always mean you must look for an entirely new source. The right treatment approach can help you get more from the one you already have.
Alantech combines water treatment engineering, reverse osmosis and application-specific design to build solutions around your existing water source. That includes RO plants for bottling water and packaged drinking water plants, as well as industrial brackish water treatment for resorts, hospitality and commercial projects across Zanzibar, Dubai and the wider UAE and Middle East region.
Looking for brackish water treatment engineering companies to design your system? Contact Alantech to discuss your water source and requirements.